Dell bios 부팅순서 - dell bios butingsunseo

Symptoms

No Boot Device Found

XPS 12-9250, 12-7275, Latitude 3490/3590, 7280, 7480, 5280, 5480, 5580, Precision 3520, Optiplex 7760, 7460, 7060, 5260, 5060, 3060, 5060 AIO (and later systems) report "No boot device found" when you change the Boot Sequence to Legacy mode in BIOS setup menu.

These specific systems are based on the 7th generation Kaby lake processor (and above) and are designed to boot exclusively in the Unified Extensible Firmware Interface (UEFI) boot environment. As a result, if legacy boot mode is selected, the system will not boot.

NOTE: This situation applies to any system from the Kaby lake 7th generation processor forward and is not limited to the systems that this article was originally based on.
NOTE: Later systems may not include an option for Legacy Mode. Proceed to troubleshoot the No Boot Device normally as this article only applies to systems that provide the Legacy Mode option.

Cause

Resolution

Return the BIOS to UEFI Boot

You can resolve this issue by returning the system to the UEFI boot mode.

1. From a power off state, power the system on and press F2 to boot into the BIOS setup menu.
2. Select "Boot sequence"
3. Change the option from "Legacy" to "UEFI", then select "Apply" in the right lower corner.
   

• Select "Advance Boot options" and disable "Enable Legacy Operation ROMs", then select "Apply" in the right lower corner.
  

• Select "Secure Boot", then "Secure Boot Enable".
• Change the option from "Disabled to Enabled", then select "Apply" in the right lower corner.
  

• Select "Exit" in the right lower corner and wait for the system to reboot.

Additional Information:

• For additional details on issues where the Hard Drive is not detected in Legacy boot mode, please see knowledgebase article "Newer Dell systems unable to boot to internal boot device in Legacy boot mode"
• Dell provides an instructional video,  "How to Fix a Boot Up Problem (Official Dell Tech Support)", that provides troublehshooting steps and is available on the Dell Youtube channel here: https://www.youtube.com/watch?v=uJcqHY7YbmA 
  

NOTE: Offers are only available for US, Canada, UK, France, Germany, and China personal computer customers. Server and Storage not applicable.

Latitude 5280/5288, Latitude 7280, Latitude 3490, Latitude 5480/5488, Latitude 7480, Latitude 3590, Latitude 5580, Latitude 7275, OptiPlex 3060, OptiPlex 5060, OptiPlex 5260 All-In-One, OptiPlex 7060, OptiPlex 7460 All-In-OneSee more

PowerEdge R630 서버의 부팅 순서 변경

이번에는 PowerEdge R630 서버의 부팅 순서 변경 방법을 알아보겠습니다.

1. F2 눌러 System Setup 들어간다.

2. System Setup에서 System BIOS로 들어간다.

3. System BIOS에서 Boot Settings로 들어간다.

4. Boot Settings에서 BIOS Boot Settings로 들어간다.

5. BIOS Boot Settings에서 Boot Sequence 누른 후 USB를 최상단으로 올린다.

6. 설정 완료

'HP,DELL 서버' 카테고리의 다른 글